Configuring ip addresses, Starting the talkswitch management software, Setting the system ip settings – Talkswitch CT.TS005.002606 User Manual
Page 5: Yz x
4
V O I P N E T W O R K C O N F I G U R A T I O N G U I D E
CONFIGURING IP ADDRESSES
Starting the TalkSwitch management software
1. Double-click the TalkSwitch Configuration 6.10 icon on your desktop. You
can also select Start > Programs > TalkSwitch 6.10 > TalkSwitch
Configuration 6.10. The TalkSwitch Management Software window
appears, and the software attempts to detect your TalkSwitch unit.
2. Select your language. You can select English, Français or Español.
3. Once the software detects your TalkSwitch unit, click Configure Auto-
Detected TalkSwitch System. The About page appears.
If the software was unable to detect your TalkSwitch unit, follow the
procedures in Step 3 — Open the TalkSwitch Management Software in the
TalkSwitch Start Guide.
Setting the system IP settings
Each TalkSwitch unit must be configured with a local IP address. These addresses
are used to direct VoIP calls to the appropriate location.
Y
Z
X