Panasonic NV-HS1000EC - Manual (Page 33)

Editing Preparation Other Functions
Editing Preparation
This VTR is equipped with programme editing functionality.
If connected via edit cable to another VTR or a movie
camera, it is possible to control such functions as tape
playback and editing.
Connections
Connecting This VTR with Another
Identical One
•Connect the two VTRs with an edit cable.
•Connect the AV1 socket on the recording VTR to the TV.
•Connect the AVI socket on the playback VTR to the AV2
socket on the recording VTR.
•Select A2 by pressing A. V on the recording VTR.
• Set EDIT MODE to PASSIVE on the playback VTR, and
to RECORDER on the recording VTR.
•Control is performed by the recording VTR.
Using This VTR as the Recording VTR
•Connect this VTR to the playback unit with an edit cable.
•Connect the AV1 socket on this VTR to the TV.
•Connect the AV2 socket or the AUD10/V1DE0/3-VIDE0
IN (AV3) sockets on this VTR to the playback unit.
•Select A2 or A3 by pressing A V on this VTR.
A2: Through the AV2 socket
A3: Through the AV3 sockets on front panel
Set INPUT SELECT on this VTR.
S-VIDEO; Through the S-VtDEO IN and AUDIO IN
sockets
LINE; Through the VIDEO IN and AUDIO IN
socKsts
• Set EDIT MODE on this VTR to RECORDER.
•Control is performed by this VTR,
Using This VTR as the Playback VTR
•Connect this VTR to the recording unit with an edit cable.
•Connect the AV1 socket on this VTR to the TV.
•Connect the AV2 socket on this VTR to the recording unit.
•Select A2 by pressing A V on this VTR.
•Set the input switch on the recording unit to AV.
• Set EDIT MODE on this VTR to PLAYER,
•Control is performed by this VTR.
«
Notes;
•When connecting a VTR or movie camera which does not
have an edit socket, see page 50.
•During editing operations, operate using this VTR; do not
operate the other unit.
•When this VTR is used as the playback VTR, it may not be
possible to perform editing operations properly depending
on the type of the recording VTR. In such a case, use this
VTR as the recording VTR.
•When a movie camera is connected, operating this VTR
will not facilitate reverse playback or reverse slow
playback on the movie camera.
•When EDIT MODE on this VTR is set to PASSIVE,
operation will not be possible, and the On Screen Display
will not appear.
•When making a connection using an edit cable,
disconnection of the AC mains lead on this VTR may
result in erroneous display patterns on the other unit.
•When operating the Jog Dial and Shuttle Ring, it is only
possible to reset the tape counter of the other unit during
still playback.
•The supplied edit cable cannot be used to connect two
other VTRs with edit sockets.
•The On Screen Display does not appear when no input
signals are supplied from another unit or when a non-
recorded cassette is played.
•The On Screen Display may appear distorted if the picture
is affected by noise.
CO
c:
.o
5
CD
a
o
o>
.c
•C:
i§
33