Unit and cassette information, Erase protection (record tab), Maximum record/playbacktime – Panasonic PV-M2037 User Manual

Page 25: D.s.t. (daylight saving time), Spring (first sunday in april), Autumn (last sunday in october), Self-demo mode, Reset all combination vcr memory functions, Head cleaning, Head clog sensor

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Unit and Cassette Information

Erase Protection (Record Tab)

Cassettes have a record tab to ensure that

recordings are not accidentally erased.

To prevent accidental
erasure, break off the tab
with a screwdriver.

To record again, cover the

hole with cellophane tape.

Maximum Record/PlaybackTime

Only

use tapes with the|VHSI >T^ark in this

unit.

Tape Speed

Setting

Type of Video Cassette

T60

T120

T160

SP
(Standard Play)

1 Hour

2 Hours

2 Hours

40 minutes

LP
(Long Play)

2 Hours

4 Hours

5 Hours

20

minutes

SLP
(Super Long Play) 3 Hours

6

Hours

8

Hours

D.S.T. (Daylight Saving Time)

Spring (First Sunday in April)

When the Combination VCR is set to DST:ON, it
automatically adds one hour and adjusts the clock.

NCRMAL TIME

1:00 a.m. 2:00 a.m.

DAYLIGHT

SAVING TIME

3:00 a.m. 4:00 a.m.

Autumn (Last Sunday in October)
When the Combination VCR is set to DST:ON, it
automatically turns back one hour and adjusts the
clock.

DAYLIGHT

SAVING TIME

1:00 a.m. 2:00 a.m.

NORMAL TIME

1:00 a.m. 2:00 a.m.

SELF-DEMO MODE

In Power On condition, hold down PLAY/REPEAT

on the Combination VCR, with no tape inserted,

for 5 seconds. The demo screen appears.

To cancel: Repeat the above operation. The demo

screen disappears.

Reset all Combination VCR Memory Functions

Use when moving the Combination VCR to a new location, or if a
mistake was made in the One Time Setup section.

• Make sure a tape is not inserted in the Combination VCR.

1) Push POWER to turn the Combination VCR on.

2) Hold down both the PLAY and REWIND buttons on the

Combination VCR for more than 5 seconds.

• The power will shut off.

3) Turn the power back on and perform the One Time Setup

section on page

8

.

Head Cleaning

Your Combination VCR will not normally require head cleaning,

however the heads may become clogged when playing an old

or damaged tape.

VIDEO HEADS MAY
NEED CLEANING

PLEASE INSERT HEAD

CLEANING CASSETTE
OR REFER TO MANUAL

END:PLAY KEY

Head Clog Sensor

If head cleaning becomes necessary,

the Combination VCR will display the
screen at right while playing back a

recorded signal. To exit this screen,

push PLAY on the remote control or
Combination VCR.

• Use “dry” type head cleaning cassette* only.

• Be sure to follow the cleaning tape instructions carefully.

Excessive use of a cleaning cassette can shorten head life.

• If using a head cleaning cassette does not solve the

problem, contact your nearest Factory Service Center or

authorized Service Center. {See page 27.)

‘Cleaning cassette part No. NV-TCL30PT is recommended.

Product Specifications

Display

Picture Tube:

VCR
Video Recording System:
Audio Track:
Tuner:

Broadcast Channels:

CATV Channels:

20 inch measured diagonal 90“

deflection Picture Tube

2

rotary heads helical scanning system

1

track

VHF2-13, UHF 14-69

Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CATV channel 5A (01)
Ultraband 65-94, 100-125

FM Radio
Band range:

87.5-108.1 MHz

General

o

Power Source:

120V AC, 60 Hz

Power Consumption:

Approx. 110 watts (Power on)

(D

Approx.

6

watts (Power off)

Television System:

EIA Standard NTSC color

3

Speaker:

1

piece

o

Cperating Temperature:

4rF-104“F (5“C-40“C)

3

fi)

Cperating Humidity:

10%~75%

Weight:

49.95 lbs. (22.67 Kg)

Dimensions:

20-3/10” (W) X 19-4/5” (H) X 19-1/10" (D)

5*

515 (W) X 503 (H) X 484 (D) mm

3

Note: Designs and specifications are subject to change without notice.

25

Advertising