Panasonic CY VMX6800U - Manual (Page 6)

@
(Ю
®
0=
о
©
со
□ For Installation
o Where and how this unit is installed differs
according to the car model concerned. As such,
the information contained in this installation
guide is designed for professional installers and
is not intended for non-technical individuals,
o Be sure to install the monitor in a position that
does not obstruct the driver’s vision,
o If the monitor has been installed for the rear
seat passengers, they must be careful to prevent
injury by hitting their heads on the monitor in
case of an accident.
o Do not install the unit in an area where it would
obstruct the operation of an air bag.
oAsk a trained technician to install the unit.
Installation and wiring require training and
experience.
To be safe, ask the sales outlet where you pur­
chased the unit to perform the installation,
o Be absolutely sure to install this unit in accor­
dance with the safety installation diagram,
o Use with 12 V DC negative ground car.
This unit is only for use with a 12 V DC negative
ground car. It cannot be used in large trucks or
diesel cars which are 24 V DC car. If it is used in
the wrong type of car, it may cause a fire or an
accident.
□ Safety Installation Diagram
Notes:
о This unit opens and closes at the maximum dimensions given above.
о Do not install this unit in any position where anyone in the driver’s seat, passenger’s seat or back seat may
injure their head or other parts of their body.
о Do not instail this unit in any position where the passengers in the back seat may injure themseives when
getting into or out of the car.
о Install the display unit in such a way that it will not be concealed behind the interior mirror when the unit is
closed.
о To secure the screws directly onto the roof of the car, insert the reinforcing supports (panels) and secure
the screws to these supports. Do not use reinforcing supports (panels) made of resin.