Clarity D704HS - Manual (Page 5)

6 7
1) Slide out the battery compartment cover.
2) Place the two batteries as indicated. Follow the polarity.
3) Slide the battery compartment cover back.
4) Put the handset on the base and charge for 16 hours first
time. A beep indicates that the handset is properly placed on
the base or charger.
Use only NiMH rechargeable batteries.
NOTE: Please refer to the Battery Safety Instructions on page 6 for
proper use and disposal of the batteries.
INSTALLING/CHARGING BATTERIES HOW TO REGISTER YOUR HANDSET
Your telephone (sold separately) can support up to five cordless
handsets. The additional handset(s) needs to register with the
telephone base before use. You must register each additional handset
separately.
The handsets provided within your main unit (sold separately) are
already registered as HANDSET 1 and so forth. Additional handsets
are assigned numbers in the order they are registered (HANDSET 2
to HANDSET 5).
When first purchased, all expansion handsets alternately display
• Press FIND on base 4 sec
and
• Then press # on handset.
The new handset should be charged without interruption for at least
30 minutes before registering to the telephone base.
How to add (register) your handset to the main unit
(sold separately)
NOTE: You must be in close proximity of your main unit's base in
order to register the handset; please move to where you can access
the FIND button on your main base (sold separately).
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to
select Registration.
2. Press <MENU/SELECT> and screen will alternately show
• Press FIND on base 4 sec
and