Panasonic CF-48 Series - Manual (Page 26)

Reinstalling Software
10 At the confirmation message, press ( Y ).
The operation of reinstallation for the hard disk starts au­
tomatically. (The operations take about 15 minutes.)
Do not cancel the reinstall procedure before it is
completed.
When a message appears instructing you to insert
the next CD, insert the recovery CD showing the
next number in the sequence, and then select [OK].
If the message “The niedia does not contain the cor­
rect file” appears, select [OK]. A message will ap­
pear instructing you to insert the next CD.
Confirm that the proper recovery CD has been in­
serted by opening the tray of the CD drive and then
close the tray, then select [OK].
11 After the reinstallation procedure completes, the follow­
ing message will appear on the display.
Remove the recovery CD.
Wmdows(R) 2000 Professional install wizard will start after reboot
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete),
Windows(R) XP Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete).
12 Restart the computer by pressing (
Ctrl)+(Alt 1 +
(
Del
) and immediately hold down (
F2
1. Release the
key when the Setup Utility starts up.
If the password has been set, enter the Supervisor Pass­
word.
13 Press
At the confirmation message, select [Yes] and then press
C Enter ] ■ (The Setup Utility settings will return to their
default values. Even the security settings with the excep­
tion of the password(s) will return to their default values.)
14 Press C F10 )■
At the confirmation message, select [Yes] and press
CEnter).
15 Perform the setup procedure for Windows by following
the instructions on the screen.
tmmmm G^Pageii
9 Page 12
<Changing the drive letter>
You can change the drive letter for the CD drive or hard disk
drive by the following steps.
• Drive letters can only be changed when two or more parti­
tions have been created on the hard disk drive. The name
of the C: drive cannot be changed.
• We recommend that you make these changes before in­
stalling applications.
1 Select [Start] - [Settings] - [Control Panel] - [Administra­
tive Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Path...].
4 Select [Edit].
5 Select [Assign a drive letter] and select the new drive let­
ter, and then select [OK].
6 At the confirmation message, select [Yes],
mmimm
1 Select [Start] - [Control Panel] - [Performance and Mainte­
nance] - [Administrative Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Paths...].
4 Select [Change].
5 Select [Assign the following drive letter] and select the
new drive letter, and then select [OK].
6 At the confirmation message, select [Yes].
16 Run the Setup Utility and change the settings where nec­
essary.
26