Panasonic CF-48 Series - Manual (Page 30)

WinDVD™
About Regions Setting
The DVD-Video has a region code that is fixed according to the region where it is sold. In order to play a DVD-Video, the
region code of the player software and of the drive must match that of the DVD-Video.
<Example>
For U.S.A. and Canada: “1”
For Europe: “2”
The region code is not set prior to the shipment of this drive. Therefore, operations will differ depending on the first DVD-
Video played.
• In the case of a DVD-Video with a specific region code:
The drive will automatically be set with the same region code as the DVD-Video.
• In the case of any other DVD-Video:
[Confirm Region] appears. Select region code and select [OK], Play now begins.
([Confirm Region] may not be displayed for some DVD-Videos. To confirm the current region code and the number of
settings remaining, right-click on the WinDVD screen and select [Setup]-[Region].)
,T note >
[Confirm Region] will also be displayed if a DVD-Video with one region code is inserted into a drive for which another
region code has already been set.
The region code can be set a total of five times, including ftie imtial setting. Proceed very carefully, because after the fourth
change has been made, the region code set last is fixed and no further changes can be made.
The user must take responsibility for any trouble that results from illegally changing or altering the region code.
Information
Inquires about WinDVD should be made to InterVideo, Inc.
InterVideo, Inc.
URL: http://wvm.intervideo.com/
E-mail: [email protected]
30