Panasonic KXL-D721 - Manual (Page 15)

Power On
Player
Turn on the player by pressing the POWER switch and then turn on the computer.
A blinking message “on” appears on the display of the player.
When turning off the player, press the POWER switch again.
The display message(s) will disappear.
Note:
• If the player is not going to be used for an extended period, unplug the AC adaptor
from both the player and AC outlet to save the power consumption. (Approximately
3,0 W power is consumed when the player is OFF and the AC adaptor is connected.)
■ Power Save Function:
Your player enters the Sleep Mode under the following conditions to save power.
• When using the player with your computer, if no command issent to the player from the
computer for more than 4 minutes.
• When using the player independently, if no button of the player is pressed for more than
4 minutes.
During the Sleep Mode, the laser and spindle motor stop.
The player automatically re-starts when it receives a command from the computer or a
button of the player is pressed.
O
o
3
3
(D
O
3*
(Q
3"
3
o
o
■o
3"
o
3
fl)
c
a
o'
0
№
2
(p
-o
1
o
-T
o
3
Speakers
Turn on the speakers by switching the POWER switch on R-speaker to on ( i )
position.
Power indicator on R-speaker lights.
Power indicator
POWER switch
When turning off the speaker, set the POWER switch on R-speaker to off (d)) position.
15