Steffes 3120 Simplified Installation Guide User Manual

Comfort plus model 3120, 12 3 quick reference installation guide, With ecm variable speed blower system

Advertising
background image

1

2

3

Quick Reference Installation Guide

PLACEMENT AND CLEARANCES

SET-UP

BRICK LOADING

“Manufactured in North America”

The area in which the

Comfort Plus is installed

must remain free of debris

and room air should be

maintained at less than

85

o

F.

1. Remove heating elements from base

of system.

2. Place system in desired location.

3. Adjust leveling legs to prevent

rocking.

4. Remove painted front panel of brick

storage cabinet.

5. Position element wiring harnesses to

avoid damage during brick loading.

6. Remove galvanized front panel.

7. Starting at bottom, lift and drape

insulation blankets over top of

system.

8. Remove front air channel by pulling

out at bottom.

9. Remove the electrical panel cover

and locate element screw kit and

outdoor sensor.

• DO remove the Comfort Plus

system from its shipping pallet

before installing.

• DO NOT extend leveling legs more

than one inch.

• DO use and follow generally

accepted safety practices when

handling insulation material.

• DO have equipment installed by a

qualified technician in compli-

ance with all applicable local,

state and national codes and

regulations.

• Reference Owner’s and Installer’s

Manual for complete safety,

installation, and operation

instructions.

Starting at the back of the brick

core, load bricks one row at a time

using left side, right side, center

pattern. Place bricks with grooved

side facing up, notch facing forward,

and ridges on left and right.

• Remove loose brick

debris from brick.

• Brick rows MUST line

up front to back

and side to side.

WARNING

WARNING

WARNING

WARNING

WARNING

B

Top View

A

G

F

60

60

15

E

STEFFES

M

A

M

M

P

Front View

D

C

ABack = zero clearance

B Front = 36 inches (for servicing)

C Right Side = 8 inches (from combustible

material)

D Top = 8 inches (from combustible material)

E Left Side = 4 inches

F Outer Sides of Return and Supply Ducts =

zero clearance

G Bottom = zero clearance

WARNING

WARNING

WARNING

WARNING

WARNING

NOTCH IN BRICK

FR

ON

T

OF

U

NI

T

with ECM Variable Speed

Blower System

COMFORT PLUS

Model 3120

Advertising