Steffes Transceiver - Manual (Page 12)

9
TRANSCEIVER INSTALLATION
CAUTION: Risk of eye injury due to flying debris. Wear eye
protection at all times during this installation.
IMPORTANT: Maximum Transceivers per Utility or Distribution Transformer – The
transceiver can be installed as a transmitter OR a receiver. Install no more
than four transmitters on one distribution transformer. There is no limit to
the number of receivers in a system.
Remove Enclosure Cover
Rainproof Enclosure
1. Remove two screws, (1).
2. Move bottom of cover down 1/2" (12 mm) and
toward you, (2), to remove cover.
Indoor Enclosure
1. Remove four screws, (1).
Mount Transceiver
Rainproof Enclosure
Securely mount the transceiver for your application.
NOTE: 10 – 1/4" (6.5 mm) holes, (1), are
provided to attach the rainproof
enclosure to the mounting surface.
Indoor Enclosure
NOTE: 4 – 3/16 x 3/8" (4.8 x 9.5 mm) slots, (1),
are provided to install indoor enclosure
flush mounted.
4 – 1/4" (6.5 mm) holes, (2), are
provided to install indoor enclosure
surface mounted.
1
1
1
1
2
1 1
1
2