Cisco OL-14625-01 - Manual (Page 4)

8-4
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14625-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Device Information
Device Information
The Device Information area on a phone’s web page displays device settings and related information for
the phone.
Table 8-1 describes these items.
To display the Device Information area, access the web page for the phone as described in the “Accessing
the Web Page for a Phone” section on page 8-2 , and then click the Device Information hyperlink.
Table 8-1 Device Information Area Items
Item Description
MAC Address Media Access Control (MAC) address of the phone
Host Name Unique, fixed name that is automatically assigned to the phone based on its MAC address
Phone DN Directory number assigned to the phone
App Load ID Identifier of the firmware running on the phone
Boot Load ID Identifier of the factory-installed load running on the phone
Version Version of the firmware running on the phone
Expansion Module 1 Phone load ID for the first Cisco Unified IP Phone Expansion Module 7914, if connected
to the phone
Expansion Module 2 Phone load ID for the second Cisco Unified IP Phone Expansion Module 7914, if
connected to the phone
Hardware Revision Revision value of the phone hardware
Serial Number Serial number of the phone
Model Number Model number of the phone
Message Waiting Indicates if there is a voice message waiting on any line for this phone
UDI Displays the following Cisco Unique Device Identifier (UDI) information about the phone:
• Device Type—Indicates hardware type. For example, phone displays for all phone
models
• Device Description—Displays the name of the phone associated with the indicated
model type
• Product Identifier—Specifies the phone model
• Version Identifier 1 —Represents the hardware version of the phone
• Serial Number—Displays the phone’s unique serial number
1. The Version Identifier field might display blank if using an older model Cisco Unified IP Phone because the hardware does not provide this
information.
Time Time obtained from the Date/Time Group in Cisco Unified Communications Manager to
which the phone belongs
Time Zone Time zone obtained from the Date/Time Group in Cisco Unified Communications Manager
to which the phone belongs
Date Date obtained from the Date/Time Group in Cisco Unified Communications Manager to
which the phone belongs