Cobra Electronics 148 NW ST - Manual (Page 13)

Operation Operation
25 24
Push and hold microphone button and speak
in a normal voice. Your voice will now transmit
on the PA speaker.
Adjust PA speaker volume with the
Dynamike control.
3
4
Base Station
Operation
(From 120V AC
House Current) Base Station Operation
(From 120V AC House Current)
To operate your transceiver from home or office
you will need a 13.8 volt DC Power Pack rated at a
minimum of 2 amps, and a properly installed base
station antenna.
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120 vac.
Note
For further information call
Cobra Customer Service
1.773.889.3087.
1 Simply connect the red (+) and black (-)
leads of the transceiver to the corresponding
terminals of the power pack.
148 NW ST manual 3.3 6/15/99 3:12 PM Page 24