Cobra Electronics 148 NW ST - Manual (Page 2)

Installation Installation
Location
3 2
Mounting and
Connection Mounting and Connection
Hold the radio with the mounting bracket in
the exact desired location. If there is no inter-
ference, remove the bracket and use it as a
template to mark the location for the mount-
ing screws.
Location
Plan location of transceiver and microphone
bracket before starting the installation.
Select a location that is convenient for operation,
yet does not inte rfe re with the dri ver or passenger.
The transceiver is usually mounted to the under-
side of the dash with the microphone bracket
beside it.
Note
The transceiver is held in the
universal mounting bracket by
four thumbscrews which allow
for adjustment at a convenient
angle.
The bracket includes two self-
tapping screws and star wash-
ers.The mounting must be
mechanically strong, conve-
niently located.
continued
Drill the holes and secure the bracket. 2
1
Connect the antenna cable plug to the recep-
tacle marked “ANT” on the back of the unit. 3
148 NW ST manual 3.3 6/15/99 3:11 PM Page 2