Cortelco COMPASS Wireless PBX System WPBX00 PRO MAN - Manual (Page 27)

WPBX00 PRO MAN
Page 27
5. AUTO ATTENDANT GUIDE
RECORDING VOICE PROMPT
5.1 A voice prompt must be recorded to use auto attendant.
5.1.1 DAY MODE- In handset, select MENU - Setting Sys - Auto Attend - Enter the SSC code
(828828) - Select Greeting - Select No Operator - Select Record. Press the right arrow to begin
recording. Record Message. Press the left arrow to end recording. Select Playback to review
the message for day mode.
5.1.2 NIGHT MODE - In handset, select MENU - Setting Sys - Auto Attend - Enter the SSC code
(828828) - Select Greeting - Select Night Mode - Select Record. Press the right arrow to begin
recording. Record Message. Press the left arrow key to end recording. Select Playback to
review the message for night mode.
5.1.3 NO ANSWER - In handset, select MENU - Setting Sys - Auto Attend - Enter the SSC code
(828828) - Select Greeting - Select No Answer - Select Record. Press the right arrow to begin
recording. Record Message. Press the left arrow key to end recording. Select Playback to
review the No Answer message.
CONFIGURE AUTO ATTENDANT
5.2 In the computer programming, select Setup - Settings - Auto Attendant.
5.3 The day and night mode time should be set in the table above. If auto change should
be enabled, click “YES” on the appropriate days.
5.4 The current mode (Day or Night) should be selected in the section labeled “Current
Mode”. Press Update to accept the change.