360 Systems MAXX-1000SD - Manual (Page 17)

MAXX Owner’s Manual Page 17
Installation
Unpacking
Your Image Server has been carefully inspected and calibrated before shipment to allow immediate
operation upon installation. Check all items for signs of visible damage which may have occurred
during shipment. If any item is damaged, contact the carrier to file a claim.
Keep the packing materials in the event that a unit must be shipped by you. If the original
packaging is not available, make sure that the following criteria are met:
• Packaging must be able to withstand the product weight.
• Product must be held firmly within the package.
• There must be at least two inches (50mm) of space between the product and outer container.
• The corners of the product must be protected.
Package Contents
Confirm that all items on the packing list have been received. Contact 360 Systems if any item is
missing.
Image Server MAXX
Keyboard
2-Button Scroll Mouse.
Software CD-ROM backup copy
Remote Workstation Software CD
Rack Mount Hardware Kit
Operations Manual
Power cord
Warranty Card
The Image Server is not shipped with a video monitor. Select a VESA-compliant CRT or LCD
monitor with a minimum refresh rate of 75 Hz. Note that the Image Server may not start
correctly if an unsuitable monitor is connected.
If you own more than one Image Server, it may be appropriate to use a single keyboard, monitor,
and mouse with a KVM switch to select between servers. Not all KVM switching systems are
compatible. The KVM switch must supply an active signal to the Image Server at all times, even
when switched away from it. When first powering up the Image Server, use only the supplied
keyboard and mouse directly connected. Then test the KVM switch system that will be used
thoroughly before installation is completed. NOTE: If the mouse and keyboard connections are
interchanged, the Image Server may not boot up properly. Be especially careful about this when
using extender cables.