acidlab Miami - Manual (Page 19)

19
You can select from the 16 patterns in the group using the row of buttons
(1-16).
The active pattern will be indicated by a blinking LED above the corresponding
button, and will start to play after the end of the last pattern.
The pattern will repeat continuously as in Pattern Play Mode.
By pressing the Write/Next button, you can set the current pattern as the first
pattern in the Track.
If you then select another pattern and press the Write/Next button, that pattern
will be saved as the second pattern in the track.
As in Pattern Play Mode, you can chain several patterns. An entire chain can
be added all at once to a track using the Write/Next button.
For example:
Pattern 1
Press Write/Next
Pattern 1 Press Write/Next
Pattern 14-15 chain Press/Write Next
The following sequence of patterns has now been saved into the Track
memory: 1, 1, 14, 15
If you use the mode switch to change to Track Play Mode, the track is
finalized. The sequence of patterns will now continuously repeat as a
track:
1, 1, 14, 15; 1, 1, 14, 15; 1, 1, 14, 15; ........
Switching to Track Write Mode will erase the track from the currently
selected pattern group!