acidlab Miami - Manual (Page 8)

8
The LED over the current pattern blinks to show that it is active. When a new
pattern is selected, the corresponding LED is lit, but stays solid. After the last
step of the current pattern, the sequencer switches to the newly selected
pattern. Now the LED of the new pattern blinks.
In total, 192 patterns are available:
12 pattern groups each consisting of 16 patterns.
Pattern Chaining
In Pattern Play mode, it is possible to chain patterns within a pattern group.
For example, to chain patterns 1 and 2 when pattern 1 is active and running,
press and hold pattern button 1. Then press pattern button 2. The LEDs of
both pattern 1 and 2 will illuminate.
The two patterns will now alternate, with the active pattern blinking and the
other solid.
The chaining of two neighboring patterns is possible with patterns 1-2, 3-4, ...
15-16. Up to all of the 16 neighboring patterns of a bank can be chained. In
addition, you can also chain from the 16th pattern to the 1st pattern!
Examples of possible pattern chains:
2-3, 4-6, 13-15, 1-16,....., 15-3
When you press any two pattern buttons simultaneously, the LEDs of all of the
patterns between them will be lit solid, with the active pattern blinking. The
chained patterns repeat after the last pattern in the chain has been played.
For example:
4 pattern chain: Selected: 2-5
2, 3, 4, 5; 2, 3, 4, 5,....
2 pattern chain: Selected: 13-14
13, 14; 13, 14, ...