Cv-, gate-bus, Warranty – acidlab Autobot User Manual
Page 32
32
CV-, Gate-Bus
If there is no CV-Gate-source connected to the CV-/Gate-Bus, then the CV-/Gate-Out
of the Autobot should be connected.
Jumper J1 and J2 must be set.
Now it is possible to control modules (e.g. VCOs or ADSRs) with the CV-/Gate-Bus.
Please do not set the jumper J1 and J2, if there is no modul in the need of the
CV-/Gate-Bus.
Warranty
The manufacturer grants a warranty of two years starting from the purchase date on
the product, in accordance with the condition described here. If defects are founded
within this time, then these will be repaired. Potentiometers, switches and sockets
apply with this product are excluded from this regulation. The decision over the
warranty claim meets the manufacturer. When determined foreign modifications or
mechanical damages any warranty claim expires. Products without warranty
authorization are liable to pay the costs repaired. In order to clarify the warranty
claim, the manufacturer is to be contacted in each case before sending back. Except
the manufacturer, no third is justified to assure or implement guaranteeings. Within
the warranty term the warranty is transferable to further buyers. Further requirements
because of consequential damages are impossible.
acidlab
Dipl. Ing. (FH) Klaus Süßmuth
e-mail:
web:
www.acidlab.de