Adaptive Technologies LTMB24 - 1x3 User Manual
Page 2
© 2008 ATM FLY-WARE Signal Hill, CA 90755 USA (562) 424-1100
030310-REV01
Step 6:
Lift up the first tier of LTMB24 loudspeakers and place it on top
of the second tier of loudspeakers. Align the frames so that the
top and bottom frame’s center ½” dia. holes match up.
Step 7: Install LTMB24-ROD-KT (sold separately)
Securely join the top and bottom tier by bolting the frames
together using a ½” threaded rod, flat washers and jam nuts
(LTMB24-ROD-KT sold separately). Insert the threaded rod
from the hole of the top frame and into the bottom frame. Use
the center holes. Apply lock-tite liquid solution on the nuts then
secure both ends of the threaded rods with flat washer and two
jam nuts (two jam nuts per end). Tighten nuts permanently until
frame and loudspeakers are tightly secured (Figure 3 and 4).
Figure 2
Figure 4
Figure 3