ALFA NETWORK AIP-W525H - Manual (Page 33)

AIP-W525H
- 28 -
5. If your ISP provides L2TP connection, please select L2TP option. Enter the following
parameters (Figure 4-12):
Figure 4-12 L2TP Settings
 User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
 Dynamic IP/ Static IP - Choose either as you are given by your ISP. Click the Connect button
to connect immediately. Click the Disconnect button to disconnect immediately.
 Connection Type –
 Connect on Demand - You can configure the Router to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time). If your Internet
connection has been terminated due to inactivity, Connect on Demand enables the
Router to automatically re-establish your connection as soon as you attempt to access
the Internet again. If you wish to activate Connect on Demand, check the radio button.
If you want your Internet connection to remain active at all times, enter 0 in the Max Idle
Time field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet connection terminates.
 Continuous - Connect automatically after the Router is disconnected. To use this option,
check the radio button.