ALFA NETWORK AIP-W525H - Manual (Page 39)

AIP-W525H
- 34 -

802.1x Authentication – Check to enable 802.1x authentication via RADIUS server.

Authentication - You can choose the type for the WEP security on the pull-down list. The
default setting is Auto, which can select Shared Key or Open System authentication type
automatically based on the wireless station's capability and request.

Key Length - You can select the WEP key length (64-bit, or 128-bit) for encryption.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not recommended) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not recommended) or 13 ASCII characters.

Note:
If you do not set the key, the wireless security function will still be disabled even if you have
selected Shared Key as Authentication Type.

Key Format - Hexadecimal and ASCII formats are provided here . Hexadecimal format
stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.
ASCII format stands for any combination of keyboard characters in the specified length.

Encryption Key - Select which of the four keys will be used and enter the matching WEP
key you have created. Make sure these values are identical on all the wireless stations in
your network.

Radius Server IP Address - Enter the IP address of the Radius server, if 802.1x
Authentication is selected.

Radius Server Port - Enter the port number of the Radius server, if 802.1x Authentication
is selected.

Radius Server Password - Enter the password for the Radius server, if 802.1x
Authentication is selected.
Be sure to click the Apply Changes button to save your settings on this page