ALFA NETWORK Bridge5-24 User Manual
Page 13
13
Verify the desire settings and use scroll down for more options.
◆
IPSec Connection Type – Use drop down menu to select from Road Warrior
Tunnel, Host to Host Tunnel, Subnet to Subnet Tunnel, Host to Host Transport,
Pass trough, Drop, or Reject. Default setting is Road Warrior Tunnel
◆
IPSec Authentication – Use drop down menu to select from SHA-1, or MD5.
◆
SA Connection Life Time – Specify how often each SA should be rekeyed,
measured in hour.
◆
Local IP address / Subnet / Gateway – Local end point IP address, Subnet, and
Gateway IP address.
◆
IPSec Operation Mode – Use drop down menu to select from Add, Route Start,
Manual, or Ignore.
◆
IKE Key Retry –Specify maximum retry limits for negotiate key to Internet Key
Exchange.
◆
Peer IP address / Subnet / Gateway – Remote end point IP address, Subnet, and
Gateway IP address.
3)
Network Name (SSID) —
SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security.
Security Mode — Select the security method and then configure the required
parameters. (Options: Disabled, WEP-AUTO, WPA-PSK, WPA2-PSK, WPA-Auto-PSK,