ALFA NETWORK Bridge5-24 - Manual (Page 36)

36
A DVANCED R OUTING
In this section, allow to configure routing feature in the OUTDOOR BRIDGE.
◆ Destination — The IP address of packets that can be routed.
◆ Type — Defines the type of destination. ( Host: Signal IP address / Net: Portion
of Network )
◆ Netmask — Displays the subnetwork associated with the destination.
◆ Gateway — Defines the packets destination next hop
◆ Interface — Select interface to which a static routing subnet is to be applied
◆ Comment — Help identify the routing
◆ RIP — Enable or disable the RIP(Routing Information Protocol) for the WAN or
LAN interface.