ALFA NETWORK AHPE305 - Manual (Page 15)

HomePlug AV 200 Ethernet Adapter User Manual
Example:
1. Press the Sync Button of device A for more than 10 seconds to ungroup it from network
group AD.
2. Then press the Sync Button of device (B or C) of network group BC for 1~3 seconds to turn it
to Broadcast State, you should find the Power LED blinks steadily signifying it is in Broadcast
state.
3. Press the Sync Button of device A again for 1~3 seconds to turn it to Join State, you should
find the Power LED blinks steadily signifying it is in Join state.
4. Wait for the Sync LED of both devices A and (B or C) lit steadily. Now you will have device A
join the network group BC.
Powerline Network Illustration
~ 12 ~