ALFA NETWORK R36 User Manual
Page 46
Advertising
46
A WDS link between two units can be configured in any of the following
Operation Mode combinations:
1.
Both units in a link are configured as Router Mode.
2.
One unit in a link is configured in Router Mode and the other in Bridge Mode.
3.
Both units in a link are configured as Bridge Mode.
When two or more units in the WDS network are set to Router Mode, be sure to
check these settings:
◆
Be sure each unit is configured with a different LAN IP address.
◆
Be sure that only one unit has an Internet access on its WAN port.
Advertising