ALFA NETWORK R36 - Manual (Page 47)

47
◆ Be sure the DHCP server is enabled only on one unit. When one unit is providing
Internet access, enable the DHCP server on that unit.
N OTE :
When using WDS Lazy mode in the network, at least one unit must be set to
Bridge or Repeater mode.
The WDS settings configure WDS related parameters. Up to four MAC addresses can
be specified for each unit in the WDS network. WDS links may either be manually
configured (Bridge and Repeater modes) or auto discovered (Lazy mode).
The following items are displayed on this page:
◆
WDS Mode — Selects the WDS mode of the SSID. (Options: Disable, Lazy, Bridge,
Repeater. Default: Disable)
■ Disable: WDS is disabled (default value)
■ Lazy: Operates in an automatic mode that detects and learns WDS peer addresses
from received WDS packets, without the need to configure a WDS MAC list entry.
This feature allows the 3G Mobileb Wireless Router to associate with other 3G Mobile
Wireless Routers in the network and use their WDS MAC list. Lazy mode requires
one other 3G Mobile Wireless Router within the wireless network that is configured
in Bridge or Repeater mode, and has a configured MAC address list.