Alyseum MS-812 - Manual (Page 14)

MS-812 – User’s manual © - Revision 1.9
Page 14
Pitch wheel
The pitch wheel message is recognized as expected but can also be preset “manually”. This gives
the wheel a starting position when the preset is recalled.
Learn
The MS-812 implements a message identity learning feature. This is implemented on the Modifiers
A and B, as well as Selector X. Once a message generator is connected to an input of the MS-812,
activating the learn button will define the next incoming message as the matching source.
Comparator
A comparator module can act on a digital output in relation to an analog source; the output will
depend on the current signal level compared to the two adjustable threshold levels (Floor and
Ceiling).
5.3.7 The Clocks sub-device
This sub-device presents 2 inputs. Each input can receive one clock flow and its related control
messages.
Each input processes messages from which it create various signals that can be hooked up to the
digital output jacks.
Clock signals
Incoming message Signals generated
Clock tick Tick
Start from zero State becomes ON, Reset pulse
Continue State becomes ON
Stop State becomes OFF
Fill-in Fill-in pulse