Alyseum MS-4 - Manual (Page 10)

MS-4 – User’s manual © - Revision 1.4
Page 10
5.2.7 PORTAMENTO:
This mode gives you direct access to the Portamento setting of the MS-812.
First select the section you will edit (MONO 1 to 7, or POLY).
● Turn the SELECT/STORE encoder to select the PORTA LED.
● Turn the EDIT/VALUE encoder to adjust the Portamento value
N.B.
1. The current Portamento setting is displayed as a crown, as shown below.
2. You can activate / deactivate the portamento by pressing the EDIT/VALUE encoder.
3. You can also visualize the Portamento value in real time via the CopperLan Manager: TAB
Edit / MS-812 / PERFORMANCE / SECTION / PITCH CONTROL
5.2.8 CUSTOM A & B:
This mode gives you direct access the CUSTOM A & B adjustments of the MS-812.
● Turn the SELECT/STORE encoder to select the CUSTOM A or B LED.
● Turn the EDIT/VALUE encoder to adjust the value
N.B.
4. The value is displayed as a crown as shown below.
5. You can activate / deactivate the CUSTOM A/B value by pressing the EDIT/VALUE encoder .