Alyseum MS-4 - Manual (Page 15)

MS-4 – User’s manual © - Revision 1.4
Page 15
7 Miscellaneous
7.1 Disclaimer
All rights reserved. Reproduction in whole or part of this document is prohibited without the express
permission of Alyseum.
© 2011-2015 Alyseum
The information and specifications described in this manual are subject to change without prior
notice
Other products or brand names mentioned herein are trademarks or registered trademarks of their
respective holders.
7.2 Maintenance
Switch Off the power before maintenance.
Do not attempt to clean the unit with chemical solvents (thinner, benzene or alcohol) as this might
damage the finish. Use only a clean, dry cloth.
7.3 Static Electricity, ESD
Electrostatic discharge (ESD) can cause malfunction and/or damage to electronic devices if
discharged into the device.
Despite Alyseum products having built-in protections against ESD, voltages might build up at
levels that could harm your equipment.
7.3.1 Standard symbols for ESD advertising
7.3.2 Some tips and precautions for ESD sensitive environment
● Make sure to discharge any built-up static electricity from yourself and your device before
touching or connecting one device to another
● Ground yourself by touching a earth grounded metal surface before handling your device
and other equipments.
● For fixed installations, place the device in a grounded metallic rack.
● Ensure air relative humidity at minimum 60%.
● Install ESD specific prevention items, such as grounding mats.
● Reduce movement speed when handling or (dis)connecting devices
● Avoid carpet or other synthetic flooring.