Aviom AN-16/i - Manual (Page 38)

30 AN-16/
i
i
Nput
M
odule
u
ser
G
uide
Front-of-house Stage
Channels 1-16
Channels 17-32
Cable connections for a 16 x 16 system; any version of the AN-16/o Output
Module can be substituted here.
To configure a 16 x 16 system:
Set up one AN‑16/i and one AN‑16/o on each side of the 1.
network. (For example, one set of an AN‑16/i and an
AN‑16/o is placed at the front‑of‑house mix position. The
matching set of one AN‑16/i and one AN‑16/o is placed on
the stage.)
Connect sixteen line‑level audio sources to inputs 1‑16 on
2.
the first AN‑16/i.
Connect a Cat‑5e cable from the A‑Net Out jack on the first
3.
AN‑16/i to the A‑Net Expansion jack on the first AN‑16/o.
Plug a Cat‑5e cable into the A‑Net In jack on the first
4.
AN‑16/o Output Module. This cable will be used to span up
to 500 feet between the two sides of the network.
Connect the cable from the A‑Net In jack in Step 4 to the
5.
A‑Net Out jack on the second AN‑16/i Input Module.
Connect the second group of sixteen audio sources to
6.
inputs 1‑16 on the second AN‑16/i.
Connect a Cat‑5e cable from the A‑Net Expansion jack on
7.
the second AN‑16/i to the A‑Net In on the second AN‑16/o.
Patch the audio outputs from the two AN‑16/o Output
8.
Modules into the desired destinations.