Bettermaker EQ 502P - Manual (Page 13)

13
Unit Address:
You can select a unit Bettermaker EQ502P to integrate a specific unit with a specific plugin.
This serves two purposes:
1. You can use multiple Bettermaker units with one host and use them in one project where every unit will have
its own selected plugin. This way you can, for example, have a 10 slot 500 rack filled with 5 Bettermaker EQs and
have 10 channels of analog correction controlled with plugins!
2. You can open many plugins in one project and use The Bettermaker recall to process consecutive stem
channels.
Notice that when you connect the USB to your DAW and Bettemaker the display will change and show the
current Address.
To access the Address selection push both Channel button and the Preset selection encoder. Push the Channel
button first and then immediately the Preset selection encoder holding still the Channel button.
The display will flash and you will be able to choose channels between 0 and 99...yes you can hook up 99
Bettermakers of one kind to one host...and we wish you will. To approve your choice simply push the Preset
selection encoder as a button.
Address 0 means the unit will “listen” to all midi automation.