Bettermaker EQ 502P - Manual (Page 16)

16
PEQ combining a boost of 7 at 20 Hz with an atten of 2 (orange); a boost of 7 @ 20 Hz combined with an atten of 5 (red)
To achieve enlightenment in Zen, you must try it out yourself! Start with very high boost and cut to hear
the effect clearly, notice a smoothing in the center frequency. Now take away the cut. Notice how the center
frequency jumps out and becomes very aggressive. In normal use, such extreme boosts and cuts are not needed.
With max boost, it might be too much for the source, but the PEQ always sounds smooth!
PEQ High Frequency band use
Simple HF Boosting: The PEQ’s high frequency boost is a standard bell shape with adjustable bandwidth at 3
kHz, 4 kHz, 5 kHz, 6 kHz, 10 kHz, 12 kHz, or 16 kHz, pictured below.
PEQ, some of the HF boost frequencies: 3 kHz, 5 kHz, 10 kHz, and 16 kHz
HF Boost Bandwidths: For a given boost setting, the wider the bandwidth is set, the lower the amount of
boost. The EQ502 Bandwidth for high frequencies can be selected between 1 and 4, where 1 is a narrowes
Bandwidth and 4 is the widest.