Bettermaker EQ542 - Manual (Page 15)

15
EQ1 slopes at 500 Hz: 0.2, 0.4, 0.7, 1, 1.3, 1.6, 2, 2.5 and 3 Octaves
EQ1 boost and cut are perfectly symmetrical
EQ1/2 Band Overlap and Interaction
The EQ1 and EQ2 bands overlap within a small range of 650 Hz to 1 kHz. Within this range it is possible for
the two bands to directly interact. Being perfect reciprocal curves, when set to the same frequency with one to
boost and one to cut, they will cancel. However, in the PEQ (described below), the curves are not reciprocal, will
not cancel and have a special interaction.
Always use your ears! Listen, and not just look at the numbers. If something sounds good… it IS good.