Inst alla tion – Bio Bidet Prestige Luxury Class Bidet Seat BB-800 User Manual
Page 15
15
INST
ALLA
TION
※Check for any water leaks.
catch plate
Place the plate and guides over each mounting hole.
Insert the mounting bolts through the plate and
mounting holes.
5
1. Slide this product onto the catch plate
centering the unit with the guide arrows on the Base.
2. You will hear a click once this product is securely
mounted to the catch plate.
3. This product will feel a little loose on the toilet bowl.
Adjust the fit from front to back and side to side for balance.
4. Tighten the nuts on both bolts securely.
7
1. Connect the flexible tube from side of
T-Valve to this product.
2. Open water valve.
3. Check for leaks.
4. If there are no leaks and the surrounding
area is clean and dry, connect the power
cord to a ground protected power outlet.
8
Slide cone packing and washers onto the bolts
then fasten to securely mount bidet seat to toilet.
6
Installation Catch Plate.
Bolt and Nut Assembly.
Assembly.
Water Supply Tube Assembly.
Cone Packing
Nut
lifestyle Upgrade
Installation Manual and Operating Instructions
Bolt Guide
Bolt
BB-800_1000 2013.3.26 3:10 PM 페이지16 mac001 JETPDF 2540DPI 175LPI