Brauner Microphones VMX lite - Manual (Page 8)

8 9
3.0 The remote
The microphones power supply/remote unit is build into a modular housing .The
PSU/remote should be placed near the console to take advantage of changing para-
meters during the rehearsal session in order to make changes to the pattern or to ac-
tivate the phase reverse in case it is needed, without having to go into the recording
room again to access the microphone, which enables a better work fl ow in the studio
and lets you hear changes more quickly. Since one of the major strengths of Brauner
microphones is their excellent Phase- and Frequency response, we have not included
fi lters into the microphones signal path. So if you need i.e. a low cut fi lter, please use
an external one that you know is good.
3.1 The front panel of the remote
On the front panel you fi nd the switch for chaning the pattern and the switch for the
phase reverse.
Also, on the front panel there is the “ON/Off“ switch.
3