ClearSounds CS-WS1 - Manual (Page 6)

Turning the Clock & Telephone
Ring Signaler On
Adjust the Alarm Function Switch to the setting you prefer.
A+T: Clock alarm & telephone ring Signal on
OFF: Both clock alarm and telephone ring
Signal off
T: Telephone Ring Signaling only
When the alarm is set to one of the modes, the alarm indicator
will appear on the display.
Your Wake & Shake distinguishes between the clock alarm and
telephone ring alarm by using different patterns. See the table below:
ALARM MODE ACTION ALARM CLOCK INCOMING CALL
SOUND Buzzer Continuous With pauses
SHAKER Vibrates Continuous With pauses
STROBE LIGHT Flashes Continuous With pauses
Snooze Key
When your clock alarm goes off, you can temporarily turn it off
using the Snooze button. The Snooze button will stop the alarm for 9
minutes. After 9 minutes, the alarm will activate again. You can
continue to hit the Snooze button for a total of 2 hours after which the
alarm mode will be automatically switched off.
The Snooze button is located at the top of the display. It is also
the strobe flasher.
CS-WS1manual.pm 2/5/04, 20:07 6