ClearSounds CS-WS1 - Manual (Page 7)

Alarm Off Button
When your clock alarm is activated, you can press the OFF
Button on the front of your clock to turn the alarm off. The alarm will
still be set for the same time and will operate at the same time the
next day.
If your alarm is activated but never switched off, it will automati-
cally turn off after 2 hours.
Telephone Ring Signaler
1. Make sure your Wake & Shake has been installed using the phone
cord and is plugged into your telephone wall jack.
2. Adjust the Ringer On/Off switch to A+T (for clock alarm & telephone
alarm) or T (for just telephone alarm).
3. Choose one of the alarm modes. (See page 4).
4. When your Wake & Shake alerts you there is an incoming call,
simply answer your telephone and the alarm will stop. When you
hang up, your Wake & Shake is ready to indicate the next call.
Adjusting Display
To adjust the brightness of the display, simply move the Dimmer
Control located on the back of your clock.
CS-WS1manual.pm 2/5/04, 20:07 7