Iii.3.6 run a program – Brookfield DV-II+ Programmable Viscometer User Manual

Page 31

Advertising
background image

Brookfield Engineering Labs., Inc.

Page 31

Manual No. M/97-164-F1 102

Activating print selections in the Print mode can only be done by exiting to the main menu and
pressing the

PRINT

key for four (4) seconds. “P%” will flash in front of the torque reading,

confirming that you are now in the Print Interval mode. Pressing

PRINT

for one (1) second

thereafter will disable the Print mode and remove the “P%” from the display.

III.3.4 PC Program (On/Off)

This option causes the serial port of the DV-II+ viscometer to go into a high speed output mode
(approximately 3 print lines per second) for use with Brookfield WINGATHER® software program.
When ON, you may enter the Options menu but will not be allowed to make any option selections
until the PC PROG is turned OFF. All front panel keys will function normally when you turn the
option ON and return to normal viscometer operation by pressing the

MOTOR ON/OFF/ESCAPE

key.

When OFF, the DV-II+ will return to the last set print time interval when printing is resumed.

From the Options menu, scroll to the screen shown in Figure 53:

SET PRINT TIME
PC PROG OFF

Figure 53

Press the OPTIONS/TAB key to display Figure 54:

SET PRINT TIME
PC PROG ON

Figure 54

Pressing the

OPTIONS/TAB

key would return you to the screen display of Figure 53. Repeated

pressing of the

OPTIONS/TAB

key would cause you to toggle back-and-forth between the displays of

Figure 53 and Figure 54.

To turn high speed output ON, press the

ENTER/AUTORANGE

key when the appropriate screen is

displayed. Then press the

MOTOR ON/OFF/ESCAPE

key to exit the Setup mode. This returns you

to the default screen display and resumes normal viscometer operation with high speed output
enabled and normal printer operation using the last entered print time interval.

Note: For access to B.E.V.I.S. option, PC PROG must be OFF.

III.3.5 Download a Program

Please refer to Section IV for details on how to create a program before proceeding with this section.

In the Options menu, scroll to the screen shown in Figure 55:

PC PROG OFF

DOWNLOAD A PROG

Figure 55

Advertising