BUCHI NIRMaste - Manual (Page 34)

6 Operation
34 NIRMaster Operation Manual, Version A
6 .5 .1 Step 1 — Select an application
After login, Press the ‘Wizard’ button to start the software wizard. The application manager appears
in a pop-up window. Select the matching application for the actual sample. Press the ‘Next’ button to
proceed with the batch manager or close the wizard with the ‘Exit’ button.
NOTE
Only applications dedicated to the NIRMaster will be shown. •
Some applications require special measurement setups. Adapt the setup accordingly to the •
measurment accessories (e.g. Spinner or XL-add-on)!
In case the application does not match for the sample material, contact the local application
•
specialist.