California Faucets Solima Roman Set and Handshower with Trim - Manual (Page 3)

7008_ii_140505.doc Pg 3
6
7
4
8
5
INSTALLING DIVERTER VALVE
Tub/Deck recommended hole size shall be Ø1-1/2”
Unscrew ALLTHREAD (11c), remove STEM (11b)
and unscrew diverter TOP NUT (11a)
From underside slide DIVERTER (11) up through
tub/deck hole and reattach TOP NUT (11a);
thread TOP NUT (11a) completely onto
DIVERTER (11) body
From underside secure DIVERTER (11) into place
by tightening NUT (11d)
Trim STEM (11b) to a height of 1-3/8” from
tub/deck finished surface
Trim ALLTHREAD (11c) a 1/2” below trimmed
STEM (11b) height
INSTALLING HANDLE
See section above
DECK HANDSHOWER FLANGE
Tub/Deck recommended hole size shall be Ø1-1/4”
Place FLANGE (12) down through tub/deck hole
From underside slide RUBBER WASHER (12a) and
STEEL WASHER (12b) onto FLANGE (12)
Secure FLANGE (12) in place with NUT (12c)
INSTALLING HANDSHOWER
Slide HEX END (13a) of hose through FLANGE
(12)
Insert RUBBER WASHER (13c) into CONICAL
END (13b) of hose and tighten to ELBOW (14)
Place WASHER (14a) into swivel nut of ELBOW
(14) and tighten HANDSHOWER (15) to ELBOW
(14)
Ш
1-1/2”
Ш
1-1/4”
1-3/8”
1/2”