Checkline BLL - Manual (Page 8)

 Electromatic Equipment Co., Inc.
-8-
9.0 ACTIVATION OF THE “SUPER USER” FUNCTION
2 times
- Options – Unlock
Enter the 4-digit password by using the button (standard is the 4-digit serial
number) and confirm by pressing the button.
Changing the Userlevel
Changing from advanced user to single user:
Make sure that you have activated the “super user” functions according to the
instructions above. Afterwards change to the menu and choose „Options“.
In the submenu please select „o Userlevel“ (2 times
- Options – o Userlevel)
Confirm by pressing the button. Now the single user is activated.
Changing from single user to advanced user:
Keep both the buttons and pressed directly after switching on the device. Your
moisture meter automatically starts the main menu. Activate the the “super user”
functions according to the instructions above.
Navigate to “Options – o Userlevel” and confirm by pressing the button.
10.0 DEVICE MAINTENANCE INSTRUCTIONS
To provide a long life of your device please does not expose it to strong mechanical
loads or heat e.g. dropping it or direct sunlight exposure. Clean your device using a
dry cloth. Any kind of wet cleaning damages the device.
It is not allowed to load the measuring head (stress, bending), other wise it can be
broken. Plug and remove the insertion probe of your BLL straight and with caution
into the wood chips.
The instrument is not rainproof. Keep it in dry areas. When the device is not used for
a longer period (2 months) or when the batteries are empty, they should be removed
to prevent a leakage of the battery acid.
 Electromatic Equipment Co., Inc.
-9-
11.0 TRANSFER SAVED DATA TO THE PC
(Only possible with the USB interface module)
To send your saved logs to the PC, connect the
moisture meter device to your PC using the USB cable
that was delivered with your device. Carefully loose the
protection cap on your moisture meter and plug in the
USB mini B connector. The bigger connector has to be
connected to a USB slot on your PC. Start the
LogMemorizer software on your PC and switch on your
BLL.
The data transfer can be started on your moisture
meter or on the software.
Starting the data transfer on the moisture meter:
Press the key until you reach the menu (see image
on the right). Then choose „Send Logs“ and confirm by
pressing the
key. Now choose „Manual Logs“ and
confirm with again. All saved logs will be sent to
your PC.
Starting the data transfer on your PC:
Press the button „remote control“ in the LogMemorizer
software. A drop-down menu with several options
opens (see image).
For transferring the data you can select „Import last
manual log“ (the last saved measuring series is
transferred) or „Import all manual logs“ (all saved logs
are transferred).
If you click on one of these menu items, the transfer
starts immediately.
For the basic adjustments of the software please look
through the instructions on the LogMemorizer CD.