Compex SP4.0 - Manual (Page 11)

09
EN
PRELIMINARY SETTINGS
Before your first use, you can define various settings. This options screen can then be displayed by switching
the device off and by pressing and holding the on/off button for at least 2 seconds.
B Press the +/- button of channel 1 to select the language to be used.
C Press the +/- button of channel 2 to adjust screen contrast.
D Use the +/- button of channel 3 to adjust the volume.
E Press the +/- button of channel 4 to adjust the backlighting.
ON: backlighting always active.
OFF: backlighting always inactive.
AUTO: backlighting activated every time a button is pressed.
A Press the on/off button to confirm and save your selections. Settings are immediately applied.
CHOOSING A CATEGORY
N.B. The following screens are generic examples but they work in the same way regardless of the device that
you have.
To switch the stimulator on, briefly press the on/off button.
Before selecting a programme, you should select the desired category.
A Press the on/off button to switch the device off.
B Press the +/- button of channel 1 to select a category.
E Press the +/- button of channel 4 to confirm your selection.
A B C D E
A B E