Ptz, com setting, Ptz device management, Ptz protocol setting – COP-USA SDDVR-WF User Manual
Page 24
22
intercom request button. You need to set the IP before you start an intercom from the server. After
this IP setting server will request an intercom to this IP (the machine with this IP must run our
client software firstly), the intercom will start if the client agree, and otherwise the intercom will be
failed.
¾ ᇹCurrent server name settingᇺThis setting can help you easy remembering the server. For
example, you can set a name “369 Nan Shan Rd.” for a server located at 369 Nan Shan Rd.
¾ ᇹSaveᇺClick this button when you finished corresponding setting options.
3.5. PTZ, COM setting
3.5.1. PTZ device management
All of our servers support 64 types of common PTZ protocols. Servers use transparent transmission
method to manage PTZ device. 12V power supply is provided by server for dome, plus RS 485
connection. The server can configure PTZ device remote parameter setting including baud rate, stop bit,
parity bit etc. and dome speed remote control via network.
3.5.2. PTZ protocol setting
The PTZ protocol setting is shown as following figure: