COP-USA SDDVR-WF - Manual (Page 27)

25
3.6.1. Video motion alarm management
   After the video motion alarm function is enabled, when there are motions in the image at specific
time and district, the video server will perform alarm operation such as JPG image capture or sensor
output combination and send alarm message to client according to the action setting. Client will deal
with the alarm according to the local setting. Video motion alarm information including server name, IP,
alarm type, and time will be saved into log for future inquiry. The setting can be set as triggering server
automatically login and image opening by client, if the client has not connect with network dome when
an alarm happened.
Motion alarm setting instruction
It is shown as following figure ᧶

Figure 3-8 Video motion detection setting
   In the “Video Alarm” setting, choose “Video Motion” for the “Alarm Type” selection, shown as
above figure.