Technical data table, Spec – COP-USA CD52W-NV User Manual
Page 9
Operation Manual for Intelligent Speed Dome Camera
Close
Figure 12 Figure 13
11.
Connect the control wires of the system as per Figure 14.
RED
BLACK
ORANGE
YELLOW
VIDEO
RED: AC24V IN
BLACK: AC24V IN
ORANGE: RS485+
YELLOW: RS485-
VIDEO: VIDEO OUT
Figure 14
3. To ensure a smooth and successful installation, you must:
1.
Have electrical work comply with latest national electrical code, national fire code,
and all applicable local codes and ordinances.
2.
Coordinate work with other trades to avoid interference.
3.
Verify existing site conditions and coordinate with owner’s representative and
appropriate utilities as required.
4.
Obtain copies of all related plans, specifications, shop drawings and addenda to
schedule and coordinate related work
5.
Thoroughly review the project to ensure that all work meets or exceeds the above
requirements. Bring alleged discrepancies to the attention of the CCTV Project
Coordinator.
Ⅴ
. Technical data table
Image inductor
1/4″
color CCD
pixels
752H×582V(440000pixels) PAL
in-phase system
in-phase inside
Video out
1.0Vp-p/75Ω
White balance
Auto/manual
Power supply
AC24V±10% 1.25A
Power consumption
30VA (including the pan/heater devicer)
weight 4Kg
Installation
Wall mounting
Opposite humidity
10-75%
spec
Environment temp
0℃~40℃
8