COP-USA ASH65NV - Manual (Page 16)

IV Description of Functions of the Menu
1. Basic Operations on the Menu
Open the main menu by the control keyboard or the matrix via the instruction of “Call Preset 64”.
In addition the main menu can be also opened by “Call Preset 1” twice within 4 seconds.
When the menu is displayed on the screen, operate “TILT UP”, “TILT DOWN” to move the cursor
to the options to be set up, and operate “PAN LEFT”, “PAN RIGHT” to modify the content or the
instruction to enter into this option.
The operation can be accelerated in case the joystick is pushed towards one direction for more than
1 second.
All setups of the menu shall not be lost even after power failure.
The application under special cases can be seen in the instruction of functions of the menu.
2. Setup of the Menu
2.1 Main Menu
DISPLAY SETUP: Enter into the submenu to setup display on the screen, such as ID DISPLAY,
TITLE DISPLAY and CAMERA DISPLAY.
CAMERA SETUP: Enter into the submenu of normal data of the
camera.
CONTROL SETUP: Enter into the submenu of the control data of the
PT.
PROGRAM: Enter into the submenu to setup enhanced function of the
PT.
CAM DEFAULT SET: Restore camera default settings.
RESET PT: Reset of the PT.
EXIT: Exit the main menu.
2.2 Display Setup
ID DISPLAY: When this option is set at ON, the monitor shall
display the address of the camera such as “CAM 001”.
ID POS: To set up the display location of the address, which can
be displayed at TOP-L (top left), TOP-R (top right), BOTT-R
(bottom right) and BOTT-L (bottom left).
TITLE DIS: when this option is set at ON, the title of the presets
can be displayed on the left of the screen when the preset is called,
such as “NO.001 ABCDEFGH”. If no title is set, then only “NO. 001” is displayed. The
modification of the title of the preset is set on the PROGRAM option.
TITLE POS： to set the display location of the title of the preset, which can be from Line 1 to Line
10. The Line 1 is on the top of the screen.
CAM DISPLAY： when this option is set at ON, the display screen of the camera can be displayed.
RETURN： to exit the main menu.
１２