COP-USA ASH65NV User Manual

Page 17

Advertising
background image

Camera Setup
SLOW SHUTTER: Slow Shutter function with Man/Auto options.
When the option be AUTO, ASS shall be displayed on the monitor.
BACK LIGHT: Backlight Compensation ON/OFF.
ICR SHOT: Low Illumination, ON–open/AUTO–automatic.
IRIS: Automatic Exposure, AUTO–automatic/MANU–manual.
D-ZOOM: Digital Zoom, ON–open/OFF–close.
FOCUS: Automatic focusing, AUTO–automatic/MANU–manual.
WB SET: White Balance, ATW /INDOOR /OUTDOOR /ONEPUSH
/AUTO /MANU
MENU OF CAM: this option is empty.
RETURN: return to the main menu.

Control Setup
WIPER: rain wiper control.
DEFROSTER: defroster control.
RESERVED AUX: auxiliary switch control.
ALARM1: external alarm 1 control.
LINKAGE1: set linkage with external alarm 1.
ALARM2: external alarm 2 control.
LINKAGE2: set linkage with external alarm 2.
HOME OPTION: enter the submenu of automatic home function.

AUTO HOME: when this option is set at ON, home position

function is opened. This means the PT shall return home
position if user has no any action in a period of time. The PT
cannot return home position automatically if it is under the
patrol state. If no home returning is needed under the stop state,
please set this option at OFF.

HOME POS: set home position. HOME POS can be sat from preset 1 to preset 63, or preset 65

to preset 128.

DWELL TIME: set the time for home position, which means the PT shall go to home position

rom 1 to 99 minutes.

if no any control occurs within the set time f

e level up.

RETURN: return to the menu on

ETURN: return to the main menu.

R

Program
AUTO PAN START POS: to set the start point of the AutoPan.
After entering, move the PT by the joystick. Push CLOSE button
to save the current position and return.
AUTO PAN END POS: to set the end point of the AutoPan.
After entering, move the PT by the joystick. Push CLOSE button
to store the current position and return.
RUN AUTO PAN: to run the

AutoPan. Please set the start point

and the end point first. If the start position and the end position is
the same position, the PT shall make 360°AutoPan. The speed of
the AutoPan

is divided into six grades: FAST/NORMAL/SLOW/

13

Advertising