COP-USA MC22-SDI - Manual (Page 2)

Safety Precautions:
DO NOT ATTEMPT TO DISASSEMBLE THE DEVICE.
Risk of Electric Shock, Do not Open
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO A QUALIFIED SERVICE
PERSON
This symbol is intended to alert the user to the presence of non-insulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operation and maintenance
instructions in the literature accompanying the appliance.
Warning!
1.
This product has patented for configuration and appearance design, and copying is not permitted.
2.
If this product fails to operate normally, contact authorized distributor or a service center. Never disassemble or modify the product in
any way. Problem caused by unauthorized user disassembly or repairs voids the warranty.
3.
Electromagnetic fields in specific frequency may cause image interference.
4. Be sure to use only the standard adapter which is specified in the specification sheet. Using other adapter could cause fire, electric
shock or damage to product.
5. Connecting the power supply incorrectly may result in fire, electric shock or damage to the product as well.
6. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat causing fire.
7. Securely plug the power cord into power receptacle. Any loose connection may result in fire.
8. When installing the camera on a wall or ceiling, fasten it safely and securely. A falling camera may cause personal injury.
9. Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or containers filled with water on top of the product.
10. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause personal injury.
11. If any unusual smell or smoke comes from the unit, please stop using the product. In such case, please immediately disconnect the
power source and contact local authorized distributor or a Service Center.
12. When cleaning, do not spray water directly onto parts of the product, or may cause fire or electric shock. Gently wipe the surface with a
dry cloth. Never use detergents or chemical cleaner on the products, or may cause fire or electric shock.