COP-USA MC22-SDI User Manual

Page 3

Advertising
background image

Cautions

1. Do not drop objects on the products or apply strong shock to it. Keep it away from a location subject to excessive vibration or magnetic-field

interference.

2. Do not install in a location subject to high temperature (over 122°F or +50℃ ), or low temperature(below 14°F or -20℃), it may cause fire.
3. If you want to relocate the installed products, be sure to turn off the power before moving or reinstalling it.
4. Remove the power plug from the outlet when there is a lightning storm. Neglecting to do so may cause fire or damage to the product.
5. Avoid a location which is exposed to direct sunlight, or near heat sources. Neglecting to do so may cause fire.
6. Install in a well-ventilated location.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions for later use.
3. Pay attention that all warnings should be adhered to.
4. Follow all instruction.
5. Do not use this product near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Do not install near any heat sources such as radiations, heat registers, or other product (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

the apparatus.

10. Only use attachment/accessories specified by the manufacturer.
11. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the antenna or cable system.

12. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product has been exposed to rain or moisture,
does not operate normally, or has been dropped.

13. Do not operate the device beyond its temperature, humidity or power source ratings. Operating temperature: 14F-122F(-20℃- 50℃);

Humidity﹤85%。

Advertising