COP-USA DVR2308SE-SL - Manual (Page 33)

DVR User Manual
27
4.5 Alarm Configuration
This function is only applicable for 16-CH DVR. Alarm configuration includes five sub menus: sensor, motion, video loss, other
alarm and alarm out.
4.5.1 Sensor
Sensor includes three sub menus: basic, alarm handling and schedule.
Operate the following steps to configure sensor alarm:
Step1: Enter into MenuSetupAlarmSensorBasic interface.
Refer to Fig 4-19:
Step2: Enable channels by checking the checkboxes beside the desired
channels.
Step 3: Set the alarm type according to triggered alarm type. Two option:
NO and NC.
Step4: Click “Apply” button to save settings.
Step5: Enter into Alarm Handling tab. Refer to Fig 4-20.
Fig 4-19 Alarm configuration-Sensor-Basic
Select hold time and then click Trigger button. A dialog box will pop-up as Fig 4-21:
Fig 4-20 Sensor-Alarm Handling Fig 4-21 Alarm Handling-Trigger